To adjust the settings of EON Steel / EON Core follow the steps below or watch this video:
1. Connect your dive computer to the PC using the supplied USB cable.
2. Open DM5 and select EON Steel / EON Core in the Devices window.
3. Select the tab General settings. You can adjust the following settings:
a. Language
b. Time & date format
c. Units
d. Tones
e. Brightness
f. Compass declination
4. After changing the settings, synchronize them with your dive computer before disconnecting the USB cable.
To synchronize:
a. Make sure the USB cable is securely connected. The cable must not be unplugged until the synchronization is completed.
b. Click Synchronize.
c.The synchronization may take several minutes. DM5 will notify you once the synchronization is completed.